Solo Extreme Pull Over Inflatable Latex Body Bag

Advanced Full‑Body Compression System — Premium Latex Construction

Solo‑Use Design — Custom‑Made to Your Measurements — USA Shipping Available

Overview

This inflatable body bag is a specialised full‑body enclosure system designed for controlled, uniform compression using two airtight layers of latex. It is engineered specifically as a solo‑use bag, allowing the user to operate the inflation and deflation system independently while maintaining full awareness and control.

This is a serious piece of equipment intended for experienced users who understand calm, deliberate operation and strict safety practices. It must be treated with respect at all times.

The dual‑skin system uses a 1.00 mm outer shell for structural strength and a 0.60 mm inner shell for close‑contact compression. When inflated, pressure builds between the two layers, tightening progressively around the entire body from head to toe.

Construction Details

• Outer Layer: 1.00 mm premium latex

• Inner Layer: 0.60 mm latex

• Full‑length design: Encloses the wearer completely, including the head

• Dual‑skin inflation chamber: Creates progressive compression

• Integrated hand inflator bulbs: Positioned near the hands for solo operation

• One‑way valves: Located on each bulb

• Main exhaust port: Used for final deflation once movement is possible

Every component is designed to maintain airtight integrity and deliver consistent pressure throughout the inflation cycle.

Entry & Positioning

The bag is accessed from the top.

1. Stand upright and place the opening of the bag over your head.

2. Gradually wriggle and ease the bag downward over the shoulders, torso, hips, and legs.

3. Continue working the latex down until the bag reaches the floor and your entire body is enclosed.

4. Once fully inside, lower yourself onto a bed or floor with your arms positioned at your sides.

5. Ensure your breathing mask is correctly placed and that you are comfortable before beginning inflation.

This top‑down entry method ensures the latex settles evenly and prevents twisting or uneven tension before pressure is applied.

Inflation Process

With the valves closed, begin pumping the hand inflator bulbs.

Stage 1 — Initial Tightening

The inner latex skin tightens first, especially around the head, neck, and upper torso.

Stage 2 — Progressive Enclosure

As pressure builds between the two skins, the tightening spreads down the torso, arms, legs, and finally the feet. Movement becomes increasingly restricted.

Stage 3 — Full Inflation

When the outer chamber contains no remaining air space, the inner skin forms a firm, uniform seal around the entire body. At this point:

• Head, arms, and legs are immobilised

• Only limited movement of the hands is possible to operate the inflator bulbs

• Vision and speech are restricted

• The user experiences complete enclosure and isolation within the latex layers

Once fully inflated, it is impossible to exit the bag until deflation begins.

Deflation Process

Deflation must be carried out slowly and calmly.

1. Open the valves on the hand pumps.

2. The first stage of deflation is slow; pressure reduces gradually.

3. Once enough air has been released to allow limited movement, the main exhaust port can be opened.

4. Only after significant pressure reduction can the user exit the bag safely.

The slow deflation is intentional and part of the design. Users must remain patient and avoid panic.

Safety Notice

This equipment is not a toy. It is a serious compression system that must be used responsibly.

• Designed specifically as a solo‑use bag.

• When fully inflated, you cannot exit the bag without deflating it, and deflation is deliberately slow.

• Users must practice entering and exiting the bag without inflation before attempting full compression.

• Always remain calm and avoid struggling; struggling will not release pressure.

• Ensure all valves and breathing equipment are functioning correctly before use.

Respect the equipment, understand its mechanics, and proceed gradually.

Custom Sizing & USA Shipping

Each bag is made to order. Before production begins, we will email you to request a few simple measurements to ensure the correct fit and performance.

We ship worldwide, including full service to the USA.