How to Care for Your Latex Rubber Gear
Latex rubber gear is an investment, and careful cleaning and storage help keep it in good condition. Whether you own an inflatable latex hood, an inflatable latex body bag, a straight jacket or a single-skinned hood, the basic care principles are the same.
Cleaning Your Latex
Always clean latex after use. Rinse thoroughly with warm (not hot) water to remove any body oils, sweat, or lubricant residue. Use a small amount of specialist latex cleaner or a very mild, unperfumed soap — avoid anything with alcohol, solvents, or strong detergents, as these will degrade the rubber over time.
Gently hand wash; never machine wash or wring latex. Rinse until the water runs completely clear, then lay flat or hang to air dry away from direct sunlight and heat sources.
Polishing
Use a dedicated latex polish to enhance the shine. At The Latex Factory, we recommend water-based polishes rather than silicone-based polishes because they are easier to remove if a repair is needed. Apply gently with a soft cloth, avoiding firm rubbing or rough materials that could scratch the surface.
Never use petroleum-based products (such as Vaseline) on latex. These will cause the rubber to break down irreversibly.
Storage
Store latex in a cool, dark place — away from UV light, heat, and ozone sources (such as electric motors). Ideally, keep pieces in individual dark bags or wrapped in tissue paper to prevent colour transfer between items and to protect the surface.
Avoid folding latex in the same place repeatedly, as this can cause crease marks over time. Hanging is preferable for larger pieces like body bags and straight jackets where possible.
Inflatable Pieces — Extra Care
For inflatable hoods and body bags, always deflate fully before storage. Check valves and inflation tubes periodically for any signs of wear or air loss. If you notice a slow leak, contact us — many minor repairs can be carried out by our workshop.
Lubricants
When wearing latex, use only silicone-based lubricants. Water-based lubricants are generally safe but offer less slip. Oil-based products — including many massage oils and petroleum jellies — will permanently damage latex and void any repair warranty.
General Tips
- Keep latex away from copper, brass, and bronze — contact with these metals causes irreversible staining.
- Avoid contact with ballpoint pen ink and many hair products.
- If latex develops a white bloom (oxidation), a good polish will usually restore it.
- Handle with care around sharp jewellery, nails, or rough surfaces.
For more workshop care advice, see our Care for Latex guide. If you have any questions about caring for a specific piece, contact us. We’re happy to help.